View RF-5845H-PP101_4632573.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

(R)
assuredcommunicationsTM
RF-5845H-PP101
DIGITAL PRE/POSTSELECTOR
provides significant reduction of unwanted receive signals and spurious transmitter outputs, allowing collocated operation of two or more systems
The digitally-tuned, high-performance RF-5845H-PP101 Pre/postselector, is designed for operation in rugged tactical environments as part of the FALCON(R) II RF-5800H-MP and AN/PRC-150(C) systems. Fully automatic operation (controlled from the host transceiver) and rapid tuning capability make pre/postselector operation virtually transparent to the user. Operational configuration and BITE/fault status reporting are all done through the respective transceivers. The RF-5845H-PP uses the rugged tactical packaging and meets the same environmental specifications for temperature, shock, vibration, and submersibility as the rest of the FALCON II family components. This capability ensures that collocation requirements can be met in even the harshest environments. Operation is fully automatic. Built-in test equipment (BITE) and diagnostic testing are fully integrated into the transceiver system. The RF-5845H-PP packaging allows it to be fitted into standard RF-5800H Series mounts and systems. The RF-5845H-PP attenuates unwanted transmit and receive signals 10 percent removed from the operating frequency by 40 dB (nominal). An additional unit can be cascaded for greater attenuation should this be required. A bypass function and separate receive antenna port give the pre/postselector the flexibility to meet virtually any system requirement. The RF-5845H-PP will tune to a new channel in less than 20 msec. This agility ensures compatibility with MIL-STD-188-141B Automatic Link Establishment (ALE), STANAG 4538 third generation, and other advanced modes of operation. The RF-5845H-PP101 includes all interconnecting cables.
Specifications for the RF-5845H-PP101
General
Frequency Range Dimensions Weight Operating Temperature Shock Vibration leakage Humidity DC Voltage DC Current Color 1.6 to 30 MHz (Bandpass filters used 2.0 to 30 MHz, low pass filter below 2.0 MHz) 5.3H x 15.25W x 11.82D inches (13.97H x 38.74W x 30.00D cm) 22.4 lb. (10.2 kg) -40 to 70C MIL-STD-810E MIL-STD-810E MIL-STD-810E (1 m submersible) MIL-STD-810E (0 to 95%) 18 - 32 VDC 1.5 Amps. at 26.4 VDC, 2.5 Amp.breaker CARC Green 383
Electrical
Bandpass Selectivity Tune Time Input Impedance Maximum Bypass Power Overall Gain Noise Figure RF Overload Trip Points 40 dB nominal (1dB) at 10% from tuned frequency <20 msec from end of frequency data, typically 12.5 msec 50 ohm unbalanced,VSWR <2:1 400 watts, 2:1 VSWR High Gain: 3 3 dB Low Gain: -8 3 dB 13 dB maximum (high gain) In band: 10 VRMS; Out of Band: 100 watts nominal peak, average power thermally limited Serial data bus from Transceiver
Control
FALCON is a registered trademark of Harris Corporation Specifications are subject to change without notice.
(R)
RF Communications Division | 1680 University Avenue | Rochester, NY USA 14610 www.harris.com 1-585-244-5830
Copyright (c) 2005 Harris Corporation 04/05 DS-332
assuredcommunicationsTM

▲Up To Search▲

Price & Availability of RF-5845H-PP101

	To Download RF-5845H-PP101 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .